VEHICLE DEVICE
45
4 x 4 patterns
When the two-four-wheel drive switch (4-wheel drive switch) is
pressed, the symbol "
" of 4-wheel drive is displayed on the
instrument. At this time, the instrument is in the state of 4-wheel
drive, with power output of the front wheel and power output
of the rear wheel. This mode is suitable for muddy conditions,
mountainous conditions and other bad road conditions.
4×4 locking mode
When the two-four-wheel drive switch (4-wheel drive switch) is
pressed, the four-wheel drive lock symbol "
" is displayed on
the instrument. At this time, the four-wheel drive lock is working in
the state of 4-wheel drive lock. The front wheel has power output,
the rear wheel has power output, and the left and right tires of the
rear wheel output the same speed and power. The vehicle will in
speed limitation and speed cannot more than 30km/h, this mode
is suitable for vehicle in troubles.
To Next Page
Loading...
