Sekonic SPEEDMASTER L-858D - Page 14

8. Tool Box
Touch the [Tool Box] icon ( ) on the Measuring screen
to display settings of functions frequently used.
No. Item name Description
1
Set Average/Contrast Function Selects On/Off.
2
Select Incident/Spot Selects the light receiving method (Incident/Spot).
3
Set Exposure Compensation Inputs a Exposure compensation value.
4
Set Filter Compensation Inputs a lter compensation value or select a lter.
5
Set Mid. Tone
Sets or edits the Mid. Tone from the measurement
or memorized value.
6
Mid. Tone Clear Deletes Mid. tone value.
7
Mid. Tone Recall Recalls Mid. tone value.
8
Set Exposure Prole Selects an exposure prole.
9
Memory Clear
Deletes measurements stored in the memory.
(Not displayed in multiple ash mode.)
0
Memory Recall
Redisplays data stored in the memory.
(Not displayed in multiple ash mode.)
a
Multi Clear Deletes accumulated data. (Displayed in multiple ash mode only.)
b
Number of Pre-ash Selects the number of times before pre-ashing is canceled.
c
Flash Duration Analysis t Value Inputs t value of Flash duration analysis.
d
Radio CH/Zone *
1
Selects a radio channel/zone.
e
▼/▲ Moves to the previous or next page.
f
Close Closes Tool Box and returns to the Measuring screen.
*
1
Content to be displayed differs depending on which transmitter (sold separately) is installed.
[Tool Box screen]
Page 1
[Tool Box screen]
Page 2
0
b
c
d
1
2
3
5
6
8
f
9 a
e
f
4
7
e
f
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com