Sekonic SPEEDMASTER L-858D - Select Measuring Mode

7. Select Measuring Mode
Different measuring modes can be selected to meet various
requirements.
* In the custom setting, you can select whether to display or hide the
measuring modes. Content to be displayed differs depending on which
transmitter (sold separately) is installed.
<Ambient Mode>
No. Description of mode
1
Ambient light T (shutter speed) priority mode
Displays F-stop value (aperture) for input shutter speed and ISO
values.
2
Ambient light F-stop (aperture) priority mode
Displays shutter speed value for input F-stop and ISO values.
3
Ambient light TF (shutter speed and F-stop) priority mode
Displays ISO sensitivity for input shutter speed and F-stop values.
4
Ambient light HD CINE mode
Displays F-stop value for input shutter speed, frame rate and ISO values.
5
Ambient light CINE mode
Displays F-stop value for input frame rate, ISO and shutter angle values.
6
Ambient light Illuminance (lux or fc) mode (Incident light measurement)
Displays brightness value in lux or foot-candle unit.
Ambient light Luminance (cd/m
2
or ) mode (Reected light measurement)
Displays brightness value in cd/m
2
or foot-lambert unit.
1
[Ambient Light T Priority Mode
Measuring screen]
[Measuring Mode
Selection screen]
Settings
Measured
values
1
2
3
4
5
6
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com