Sel SEL-3031 - List of Tables

Date Code 20091009 SEL-3031 Instruction Manual
List of Tables
Table 1.1 Radio Antenna and Cable Accessories..................................1.3
Table 2.1 Fresnel Zone Diameter ..........................................................2.3
Table 2.2 900-MHz Frequency Skip Zones...........................................2.6
Table 2.3 Length vs. Loss in Coaxial Cables at 900 MHz ....................2.6
Table 2.4 Default Passwords................................................................2.10
Table 2.5 Password Jumper Position...................................................2.10
Table 2.6 Communications Cables for Time and Communications
Connections ....................................................................2.11
Table 2.7 Front-Panel Status Indicator LEDs......................................2.11
Table 2.8 SEL-3031 Port Description..................................................2.12
Table 2.9 SEL-3031 Port Description..................................................2.13
Table 4.1
ACSELERATOR QuickSet SEL-5030 Software......................4.1
Table 4.2 Device Editor Menus.............................................................4.9
Table 4.3 Global Settings ....................................................................4.11
Table 4.4 Radio Settings......................................................................4.12
Table 4.5 SKIP Zone Frequencies.......................................................4.12
Table 4.6 Port X Settings.....................................................................4.14
Table 4.7 Fixed Port Settings...............................................................4.15
Table 4.8 DATE Command..................................................................4.17
Table 4.9 ID Command .......................................................................4.17
Table 4.10 IRIG Command ...................................................................4.18
Table 4.11 L_D Command ....................................................................4.18
Table 4.12 PAS Command.....................................................................4.19
Table 4.13 Factory Default Passwords ..................................................4.19
Table 4.14 Valid Password Characters ..................................................4.20
Table 4.15 QUIT Command..................................................................4.20
Table 4.16 RAD Command ...................................................................4.21
Table 4.17 SER Command ....................................................................4.22
Table 4.18 SET Command (Change Settings).......................................4.22
Table 4.19 SET Command Editing Keystrokes.....................................4.23
Table 4.20 SHO Command (Show/View Settings)................................4.23
Table 4.21 STA Command (Device Self-Test Status) ...........................4.24
Table 4.22 STA Command Report.........................................................4.24
Table 4.23 Command Definitions..........................................................4.25
Table 5.1 Device Self-Tests...................................................................5.5
Table 5.2 Troubleshooting Tips.............................................................5.6
Table A.1 Firmware Revision History...................................................A.1
Table A.2 Instruction Manual Revision History....................................A.1