Selco NEOMIG 2400 XP - User Manual

Neomig
1600-2000-2200-2400
2000-2400 XP
ISTRUZIONI PER L’USO
INSTRUCTION MANUAL
BETRIEBSANWEISUNG
MANUEL D’INSTRUCTIONS
INSTRUCCIONES DE USO
MANUAL DE INSTRUÇÕES
GEBRUIKSAANWIJZING
BRUKSANVISNING
BRUGERVEJLEDNING
BRUKSANVISNING
KÄYTTÖOHJEET

Summary

USE AND MAINTENANCE MANUAL

1 WARNING

1.1 Operator and Other Persons Protection

Safety for users and bystanders.

1.1.1 Personal Protection

Specific personal safety gear and practices.

1.1.2 Other Persons Protection

Protecting bystanders from hazards.

1.2 Protection Against Fumes and Gases

Guidance on ventilation and fume protection.

1.3 Fire;Explosion Prevention

Measures to prevent fires and explosions.

1.4 Electromagnetic Compatibility (EMC)

Information on EMC compliance and reduction methods.

1.4.1 Installation, Use and Area Examination

Site assessment for EMC.

1.4.2 Emission Reduction Methods

2 INSTALLATION

2.1 Lifting, Transport and Unloading Procedures

2.2 Positioning the Power Source

2.4 Connection

Electrical and gas connections.

2.4.1 Mains Voltage

2.4.2 Selecting the Mains Voltage

2.4.3 Earthing

Importance and method of grounding.

2.5 Commissioning

2.5.1 Start-up

3 MACHINE DESCRIPTION

3.2 STANDARD Front Control Panel

3.3 XP Front Control Panel

3.3.1 Set up

4 MAINTENANCE

Routine Maintenance

Periodic Controls

5 POSSIBLE ELECTRICAL FAILURES

Machine Does Not Switch On (L1 off)

Troubleshooting power-on issues.

Limited Power Delivery

Diagnosing low output issues.

Wire Feed Stops (L2 on)

Troubleshooting wire feeder problems.

No Power Command

Issues related to control commands.

No Motor-Gas-Power Command

Problems with combined functions.

No Arc Striking

Diagnosing arc initiation failures.

Selco NEOMIG 2400 XP Specifications

General

Brand	Selco
Model	NEOMIG 2400 XP
Category	Welding System
Language	English