Need help?Do you have a question about the Selco Genesis 90 and is the answer not in the manual?
Details precautions for live parts, including unplugging and waiting for discharge.
Advises keeping hands away from moving parts and ensuring the machine is unplugged.
Warns about hot components and avoiding contact with heat sinks.
Details personal protective equipment and measures to protect others from welding hazards.
Covers prevention of fires, explosions, and risks from fumes/gases.
Lists common cutting defects and their potential causes.
Describes the LEDs and displays on the front panel that provide diagnostic information.
Details common error codes, their meanings, and required actions.
Details parameters like reset, pressure switch, and current limitation.
Outlines systematic troubleshooting, testing, and verification procedures.
Explains the procedure for calibrating the generator's output current.
Highlights critical safety warnings for the operation check procedure.
Details the board's function and stresses safety precautions for measurements.
Emphasizes using a static load, external measurement, and trigger conditions for calibration.
Warns about the high sensitivity of P2 and P3 trimmers during calibration.
General| Brand | Selco |
|---|---|
| Model | Genesis 90 |
| Category | Welding System |
| Language | English |
To Next Page