Need help?Do you have a question about the Selco Saber 70 chp and is the answer not in the manual?
Specifies environmental conditions for safe operation.
Outlines personal protective measures for users and bystanders.
Details safety measures for fumes and gas exposure.
Addresses potential interference and health effects.
Specifies the equipment's ingress protection rating.
Guidelines for safely moving the equipment.
Instructions for placing the machine in its operating location.
Specific steps for connecting the plasma cutting torch and earth.
Overview of the Saber 70 chp plasma cutter features.
Description of the controls and indicators on the front panel.
Explains the main display modes (XE, XA, XP) and their elements.
How to read cutting current, voltage, and pressure.
Details on managing and storing cutting programs.
How to save custom cutting programs.
How to load previously saved cutting programs.
How to lock and unlock the control panel with a password.
Setting warning and guard limits for cutting parameters.
Explains alarm codes and their meaning.
Description of the connections and components on the rear panel.
Identification of power and earth sockets.
Information about the specific torch accessory.
Troubleshooting steps for no power output.
Diagnosing issues with the wire feeder.
Steps to resolve issues with arc initiation.
Troubleshooting reasons for arc loss during cutting.
Solutions for inconsistent wire feeding.
Addressing issues causing unstable arcs.
How to improve cut penetration.
Causes and solutions for undercuts in cuts.
Addressing slag that remains in the cut.
Solutions for the electrode sticking to the workpiece.
How to reduce excessive dross formation.
Troubleshooting reasons for nozzle overheating.
Explanation of how plasma cutting works.
Specifications for carbon steel cutting thickness and parameters.
Specifications for stainless steel cutting thickness and parameters.
General| Brand | Selco |
|---|---|
| Model | Saber 70 chp |
| Category | Welding System |
| Language | English |
To Next Page