9
ENGLISH GERMAN FRENCH SPANISH ITALY
There are a number of common issues that can aect the signal reception quality or the
operation of the SNIPE DRIVE. The following sections address these issues and potential
solutions.
i.
Connection between the power and controller
Connection between the controller and the antenna.
Check if the power input cable has been damaged.
Check the battery polarities (+/-).
ii.
iii.
A. No function when you power on the Controller
Check again all the cable connections have been made correctly.
C. Mechanical problems
i.
Try to power OFF/ON again. If problem persists, please contact your local distributor for assistance.
If the antenna makes a noise while remaining static.
i.
ii.
B. Fail to search the selected satellite
Satellite signals can be blocked or degraded by buildings, trees.
Make sure there are no obstructions in southward direction.
Upgrade your SNIPE DRIVE to the latest version.
i.
D. Other issues
If the system has been improperly wired, it will not operate properly. Contact your local
distributor for assistance of cable damage.
5. Troubleshooting
To Next Page
Loading...
Need help?
General
