Seltron RCD1 - Page 17

| 17Instructions for use
EN
ADDITIONAL AND
SERVICE SETTINGS
No. Description Range
P1.5
MINIMUM SCREEN ILLUMINATION
This setting determines minimum display illumina-
tion.
0 ÷ 100 % (5)
P1.6
MAXIMUM SCREEN ILLUMINATION
This setting determines maximum display illumina-
tion.
0 ÷ 100 % (80)
P1.7
DISPLAY CONTRAST
This setting determines display contrast.
1 ÷ 8 (6)
P1.8 SOUND
This setting determines when sound is activated
0 - never
1 - buttons
2 - buttons and warnings
3 - buttons, warnings,
and notifications
P1.9 DISPLAYING WARNINGS AND MESSAGES
This setting determines whether warnings and notifi-
cations are displayed.
0 - no display
1 - warnings
2 - warnings and
notifications
P1.10 BASIC DISPLAY
This setting determines which information will be
displayed on the basic display.
1 - room temp.
2 - auxilliary temp.
3 - d. h. w. temp.
4 - humidity
5 - air pressure
6 - auxiliary sensor
7 - air quality*
11 - T1 controller sensor
...
22 - T12 controller sen-
sor
P1.11 FIRST DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed first in the info line.
0 - no display
1 - room temp.
2 - auxilliary temp.
3 - d. h. w. temp.
4 - humidity
5 - air pressure
6 - auxiliary sensor
(AUX) 7 - air quality*
11 - T1 controller sensor
...
22 - T12 controller sen-
sor