Seltron RCD1 - Page 18

18 |
Instructions for use
EN
No. Description Range
P1.12 SECOND DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed second in the info line.
Setting range is identical
to parameter P1.11.
Factory setting is:
3 - d. h. w. Temp.
P1.13 THIRD DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed third in the info line..
Setting range is identical
to parameter P1.11.
Factory setting is:
4 - humidity
P1.14 FOURTH DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed fourth in the info line.
Setting range is identical
to parameter P1.11.
Factory setting is:
5 - air pressure
P1.15 FIFTH DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed fifth in the info line.
Setting range is identical
to parameter P1.11.
Factory setting is:
0 - no display
P1.16 SIXTH DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed sixth in the info line.
Setting range is identical
to parameter P1.11.
Factory setting is:
0 - no display
P1.17 SEVENTH DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed seventh in the info line.
Setting range is identical
to parameter P1.11.
Factory setting is:
0 - no display
P1.18 NUMBER OF INFORMATION ON BASIC DISPLAY
This setting determines how many information from
the info line should be alternatively displayed on the
basic display.
1 ÷ 9 (1)
PARAMETER GROUP P2 - ROOM UNIT ADDRESS
No. Description Range
P2.1 ROOM UNIT ADDRESS
This setting determines room unit address. It can be 1
or 2. During initial operation, room unit address is set
automatically.
0 - auto setting
1 - address 1
2 - address 2
* RCD1 Premium and RCD2 Premium only.
ADDITIONAL AND
SERVICE SETTINGS