30
Disable delay
The disable delay is a small time period that will keep the loop closed after
the coin return button has been activated by the customer. This delay is
there to let the copier finish its copy. Some copiers on the market will simply
stop the entire process of making a copy just at the moment the loop opens,
thus creating a paper jam. You then have to set a delay long enough to al-
low the copier to finish the job. However, do not set a delay too long as you
will then have the problem of starting a second copy –that will eventually jam
- for the price of one. Careful with the different paper format. An 8,5 x 14
and an 11 x 17 sheet will take longer to come out of the copier. This pa-
rameter is not visible when the Smart interface is used.
Copier Type with Smart Interface (see page 11)
If your vend station is equipped with the optional Smart Interface, it can com-
municate with a copier offering serial communication. At the time of printing,
only the following copiers will communication with the 9900X equipped with
the Smart Interface:
Konica-Minolta Biz-Hub Vender 1
Konica-Minolta Biz-Hub Vender 2
Kyocera-Mita Task-Alfa.
Please refer to the copier manual for the proper setting in the copier. If there
is no communication between the copier and the Vend Station, an error
message will be visible on the display of the 9900X, on the copier's display
or on both displays..
You cannot connect your vend station to a serial copier without the
smart interface. You cannot connect your vend station to a standard
copier with the smart interface.
To Next Page
Loading...