4
Definition of the terms used in this manual
Below is the description of all the terms used in this manual. Take a mo-
ment to be acquainted with those terms. You will see them often in the man-
ual.
Terms Meanings
Audit Accounting information.
Bill acceptor The bill acceptor is a device capable of discriminat-
ing between good and bad bills. The bills accepted
will vary according the country.
Bill box Bill cassette where all the bills are stacked
Black The black button on the circuit board for the coin-op.
Blind time This is the time between two genuine debit pulses.
If a value is programmed in the blind time, the Sta-
tion will ignore any pulses coming from the copier if
this pulse comes within the time set.
Blue The blue button on the circuit board for the Vend
station.
By-pass, Free copy Small cam-style lock on the top left corner of the
Vend Station enabling free access to the copier.
Card reader A card reader enables you to accept a payment
card. The card can be with a magnetic stripe or a
smart chip. The reader can be Serial or MDB type.
If MDB, it will connect to the same MDB port used by
the coin changer. If serial, it connects to J6 on the
main board. Or it can be an MDB credit card reader.
CC reader CC refers to a Credit Card (Visa/MasterCard/Debit)
Coin box Metal box into which any coins not going into the
coin changer tubes will fall.
Coin changer The coin changer is the apparatus that receives the
coins from the customer, validates it, sorts it, and
gives change back if needed. The coin changer var-
ies according to the country or your needs. It can
have 3, 4, 5, or 6 tubes of change.
Coin/Card return A.K.A. escrow, refers to the button a customer
pushes to get his change back or release a jammed
coin or get his card back.
Coin-op A.K.A. vend station it represents the entire appara-
tus and all its peripherals.
Disable Permission to make a copy is denied by the coin-op.
To Next Page
Loading...