2）AUTO or MANUAL mode
By pressing the “2/AUTO” to select the automatic or manual mode
“AUT”is automatic counting mode: when place the notes in the hopper, then machine will start counting
automatically.
“MNL” is manual counting mode: when place the notes in the hopper, should press “RESTART” to start
counting
Notes: In the “AUTO” mode, if the notes is very old or deteriorated, it will lead to feeding sensor
does not work.
3）ADD function
By pressing the “ADD” to turn on/off the ADD function. When the ADD is showed in the display, it means
the ADD function is on; vice versa. And the ADD function can work combined with the batch mode.
In the ADD mode, when the number of the counted notes in the stacker reached up to 100 pcs, the
machine will stop counting and the display will show “FUL” to notice the user the stacker is full and remove
To Next Page
Loading...