the last one on the stacker. Remove the dubious bill, press “RESTART” key to continue or remove all of the
bill and recount.
——The sensitivity of UV detection can be adjusted. Press “UV” key for 3 seconds, the display will show
the current sensitivity level(range from 0-9 ), then press numeric key 0-9 to choose the desired sensitivity
level (1 is the lowest, 9 is the highest, o is off). After choosing of the level, press “RESTART”key to confirm.
3）MG detection function
——Used for detecting the bills with MG specialty
——Press “CF”, then press “MG” to turn on or off the MG function; the MG function is on when the “MG”
is showed in the display, otherwise, is off.
——-If the machine detects a counterfeit note when counting, it will stop and emit “beep” sound, and the
display will show the error code”nng” (alerting the user there is a dubious bill). The dubious bill will always be
the last one on the stacker. Remove the dubious bill, press “RESTART” key to continue or remove all of the
To Next Page
Loading...