bill and recount.
——The sensitivity of MG detection can be adjusted. Press “MG” key for 3 seconds, the display will
show the current sensitivity level(range from 0-9 ), then press numeric key 0-9 to choose the desired
sensitivity level (1 is the lowest, 9 is the highest, o is off). After choosing of the level, press “RESTART”key to
confirm.
4）IR detection function
——Used for detecting the bills with MG specialty
——Press “CF”, then press “IR” to turn on or off the IR function; the IR function is on when the “IR” is
showed in the display, otherwise, is off.
——-If the machine detects a counterfeit note when counting, it will stop and emit “beep” sound, and the
display will show the error code”dbl” (alerting the user there is a dubious bill). The dubious bill will always be
To Next Page
Loading...