Note: when the counting speed reached up to 1600pcs/min, the machine does not have the MG and DD
detection.
6）Hopper adjustment
When the feeding of the notes is faulty, for example it comes up with the problem of double-note (error
code: dbl), chain note (error code: CHN))and incorrect count, user should rotate the adjusting screw to the
anticlockwise direction until the problem is solved.
When the feeding of the notes is faulty,for example it comes up with the problem of counting is not
smooth, and the notes become deformed and broken after counting, user should rotate the adjusting screw
to the clockwise direction until the problem is solved.
Notes: Each machine is tested before leaving from our factory, so there is no need to adjust at the
first use. After a long time of using, the user maybe should have to make a little adjustment to make
the count smoothly.
To Next Page
Loading...