Suspicious bill detected by
DD function;
Remove the suspicious bill from the stacker,
press “RESTART”to continue;
Remove all the bill from the stacker,
press “RESTART”to continue;
Problem with the DD
function
Lower the DD sensitivity level
Remove all the bill from the stacker,
press “RESTART”to continue;
7. Fault messages and solutions
Problem with the right inner
counting sensor.
Clean the sensor or replace it.
Problem with the left inner counting
sensor.
Clean the sensor or replace it.
Problem with the reset sensor or
control circuit; if there is something in
the stacker when turn on the machine,
also will come up with this fault code.
Remove the things in the stacker, if the
problem not solved, should replace the
reset sensor or remove the main board
Problem with the the main motor and
the control circuit
Replace the main motor or the main board
To Next Page
Loading...