SEMTOM ST-900 - Page 8

第 7 页 共 24 页
3
BATCH
Key
1.Press this key to turn on the batch function, then press again the user can choose
the batch number among 10, 20, 25, 50, 100, or can input the batch number(less than
999) by pressing the numeric keys, then press “C” key to save and exit the batch
mode.
2. In the batch mode, press “1238” numeric keys then press “RESTART”, the user
can check the total counting number since the machine left from the factory
4
0-9
Numeric
Key
Only in the batch mode or sensitivity setting, the numeric is valid
5
2/AUTO
Key
1. It is number 2
2. Press “CF” first then press this key to switch the counting mode, “AUTO”--
automatic mode, “MUL”-- manual mode
6
1/ADD
Key
1. It is number 1
2. Press “CF” first then press this key to turn on/off the ADD function. This function
can work under the batch mode
7
SPEED
Press this key can switch the counting speed (800, 1100, 1400, 1600 pcs/min)
8
Count
display
Show the counting number of the notes
9
Batch
Show the batch number or the counting number (one time counting)