Sena 50S - Page 5

TABLE OF CONTENTS CONTINUED
13. FUNCTION PRIORITY AND FIRMWARE
UPGRADES 57
13.1 Function Priority 57
13.2 Firmware Upgrades 57
13.2.1 Using the WiFi Adapter 57
13.2.2 Using the Sena Device Manager 58
14. CONFIGURATION SETTING 59
14.1 Headset Configuration Setting 59
14.1.1 Delete All Pairings 60
14.1.2 Remote Control Pairing 60
14.2 Software Configuration Setting 60
14.2.1 Speed Dial 60
14.2.2 Channel Setting (Default: channel 1) 60
14.2.3 Headset Language 60
14.2.4 Mesh Reach-Out (Default: Disable) 61
14.2.5 Audio Equalizer (Default: Music Balance) 61
14.2.6 Audio Boost (Default: Enable) 61
14.2.7 VOX Phone (Default: Enable) 61
14.2.8 VOX Intercom (Default: Disable) 62
14.2.9 VOX Sensitivity (Default: 3) 62
14.2.10 Bluetooth Intercom Audio Multitasking
(Default: Disabled) 62
14.2.11 Intercom-Audio Overlay Sensitivity (Default: 3) 63
14.2.12 Audio Overlay Volume Management (Default: Disable) 63
14.2.13 HD Intercom (Default: Enable) 63
14.2.14 HD Voice (Default: Enable) 64
14.2.15 Smart Volume Control (Default: Disable) 64
14.2.16 Sidetone (Default: Disable) 64
14.2.17 Voice Assistant (Default: Enable) 64
14.2.18 Voice Prompt (Default: Enable) 65
14.2.19 RDS AF Setting (Default: Disable) 65
14.2.20 FM Station Guide (Default: Enable) 65
14.2.21 Advanced Noise Control™ (Default: Enable) 65
15. TROUBLESHOOTING 66
15.1 Fault Reset 66
15.2 Factory Reset 67