Sena 5S - Page 41

5S Motorcycle Bluetooth Communication System | 41
11 CONFIGURATION SETTING
11.2.4 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as “Hello” loudly or by blowing air into the
microphone. VOX phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the Jog Dial or
the Phone Button to answer an incoming call.
11.2.5 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can initiate an intercom conversation
with the last connected intercom friend by voice. When you want
to start intercom, say a word such as “Hello” loudly or blow air into
the microphone. If you start an intercom conversation by voice, the
intercom terminates automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to terminate the
intercom conversation manually. However, if you start the intercom
by voice and end it manually by tapping the Jog Dial, you will not be
able to start intercom by voice temporarily. In this case, you have to
tap the Jog Dial to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After
rebooting the headset, you can start the intercom by voice again.
11.2.6 Audio Source Priority (Default: Intercom)
Audio Source Priority allows you to select the priority between the
intercom and music (which includes GPS app instructions and message
notifications) from a smartphone. If the intercom is selected as the
audio source priority, your music will be interrupted during an intercom
conversation. If music is selected as the audio source priority, intercom
conversations will be interrupted while your music is heard.
Note: Audio Source Priority is active only when Audio Multitasking
is disabled.