Sena 5S - HD Voice (Default: Enable); Sidetone (Default: Disable)

5S Motorcycle Bluetooth Communication System | 43
11 CONFIGURATION SETTING
11.2.8 Background Volume (Default: Level 5)
The Background Volume can be adjustable only when the Audio
Multitasking turns on. Level 9 is the highest volume and 0 is the lowest.
11.2.9 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. If this feature is disabled, the two-way intercom audio will
change to normal quality.
Note:
• The intercom distance of HD Intercom is relatively shorter than
that of normal intercom.
• HD Intercom will become disabled temporarily when Audio
Multitasking is enabled.
11.2.10 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations.
If this feature is enabled, incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not be heard during
intercom conversations.
Note:
• Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
• HD Voice is active only when Audio Multitasking is disabled.
11.2.11 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.