Sena HelloDevice LS100 - 1.3 Product Specification

7
1.3 Product Specification
One male DB9 serial port for data communication/serial console
Serial speeds 1200bps to 115200bps
Flow Control: None, Hardware RTS/CTS
Serial Interface
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
10 Base-T Ethernet with RJ45 Ethernet connectorNetwork Interfaces
Supports static and dynamic IP address
Protocols ARP, IP/ICMP, TCP, Telnet, DHCP client, PPPoE
Security User ID & Password
Telnet or serial console port or HelloDevice ManagerManagement
Full-featured system status display
Diagnostic LED Power
Ready
10 Base-T Link, Act
Serial Rx/Tx for data serial port
Supply voltage
7.5V ~ 15V DC
Power
Supply current
140mA (nom.)
Environmental
Operating temperature: 0 ~ 50
o
C
Storage temperature: -20 ~ 66
o
C
Humidity : 90% (Non-condensing)
Dimension
100 mm L (3.9 in.)
72 mm W (2.8 in.)
29 mm H (1 in.)
Physical
properties
Weight
230g
Approvals FCC(A), CE(A), MIC
Warranty 5-year limited warranty