Sena IMPULSE User Manual

Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
①
Enter into the Channel Setting.
2x
TAP
“ Channel setting, 1”
②
Navigate between channels.
(1
2 ••• 8 9 Exit 1 •••)
1x
TAP
or
1x
TAP
“ #”
③
Save the channel.
1x
TAP
“ Channel is set,
channel #”
Note: You can use the SENA MOTORCYCLES App to change the
channel.

Sena IMPULSE Specifications

General

Bluetooth	Bluetooth 5.0
Charging Time	2.5 hours
Mesh Intercom	Yes
FM Radio	Yes
Voice Command	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Profiles	HSP, HFP, A2DP, AVRCP
Charging Temperature	0°C to 45°C (32°F to 113°F)
Wide Fit	No
Intercom Range	Up to 2 km (1.2 miles)
Battery Talk Time	Up to 12 hours
Type	Full-face helmet
Pinlock	Pinlock-ready visor
Material	Fiberglass composite shell
Safety standard	ECE 22.05
Communication Range	Up to 2 km (1.2 miles)
Audio Support	Advanced Noise Control
Mobile App Support	Sena Motorcycles App