Sena IMPULSE User Manual

Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a
Mesh Intercom.
1s
HOLD
“ Mic on” or “Mic off”
Reset Mesh
If a Bluetooth system in an Open Mesh or Group Mesh resets the
Mesh, it will automatically return to Open Mesh (default: channel 1).
8s
HOLD
“ Reset Mesh”

Sena IMPULSE Specifications

General

Bluetooth	Bluetooth 5.0
Charging Time	2.5 hours
Mesh Intercom	Yes
FM Radio	Yes
Voice Command	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Profiles	HSP, HFP, A2DP, AVRCP
Charging Temperature	0°C to 45°C (32°F to 113°F)
Wide Fit	No
Intercom Range	Up to 2 km (1.2 miles)
Battery Talk Time	Up to 12 hours
Type	Full-face helmet
Pinlock	Pinlock-ready visor
Material	Fiberglass composite shell
Safety standard	ECE 22.05
Communication Range	Up to 2 km (1.2 miles)
Audio Support	Advanced Noise Control
Mobile App Support	Sena Motorcycles App