Sena IMPULSE User Manual

2) Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new
users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing
Group Mesh Open Mesh Existing Group Mesh
F
D
You
B
C
You
D
B
F
C
①
One (You) of the current users in the Existing Group Mesh and
new users (D and F) in Open Mesh enter into Mesh Grouping to
join the Existing Group Mesh.
5s
HOLD
“ Mesh Grouping”
②
When Mesh Grouping is completed, the
new users (D and F) will
hear a voice prompt on their Bluetooth system as Open Mesh
switches to Group Mesh.
D F
“ Group Mesh”

Sena IMPULSE Specifications

General

Bluetooth	Bluetooth 5.0
Charging Time	2.5 hours
Mesh Intercom	Yes
FM Radio	Yes
Voice Command	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Profiles	HSP, HFP, A2DP, AVRCP
Charging Temperature	0°C to 45°C (32°F to 113°F)
Wide Fit	No
Intercom Range	Up to 2 km (1.2 miles)
Battery Talk Time	Up to 12 hours
Type	Full-face helmet
Pinlock	Pinlock-ready visor
Material	Fiberglass composite shell
Safety standard	ECE 22.05
Communication Range	Up to 2 km (1.2 miles)
Audio Support	Advanced Noise Control
Mobile App Support	Sena Motorcycles App