OUTSTAR S Bluetooth
®
Helmet | 45
12. MAINTENANCE AND CARE
12.1 Outer Shell
Use a soft cloth and a small amount of water to remove bugs from the
exterior.
Note: Never use gasoline, diesel fuel, thinners, or solvents to clean
the helmet. These substances can cause serious damage to the
helmet, even though the resulting damage may not be visible. The
full safety function of the helmet can then no longer be guaranteed.
12.2 Inner Lining
The inner lining of the helmet is completely removable. Its headliner can
be washed by hand using mild soap at a maximum temperature of 30°C
(86°F). Allow the lining to dry at room temperature.
12.3 Storing the Helmet
Store the helmet in a dry, dark, well-ventilated location, out of the reach
of children and animals. Always position the helmet so that it cannot
fall to the floor. Damage that occurs in this way is not covered by the
warranty.
CHAPTER
To Next Page
Loading...
