Sena Parani A10 - Troubleshooting Guide; Performing a Fault Reset; Restoring Factory Defaults

28
9.2 Factory reset
If you want to restore the headset to factory default
settings, use the Factory Reset in the conguration
menu. The headset automatically restores the
default settings and turns off.
9 TROUBLESHOOTING
9.1 Fault Reset
When the headset is not working properly, you can
easily reset the unit:
1. Locate the Pin-hole reset button below on
the back of the main unit.
2. Gently insert a paperclip into the hole
and tap the Fault Reset Button with light
pressure.
3. The headset will shut down.
Note: Fault Reset will not restore the headset to
factory default settings.