Sena +MESH User Manual

11
MESH INTERCOM
3.2 SENA Products That Can Communicate
with +Mesh via Mesh Intercom
• +Mesh
• Mesh headset or helmet
Note: If +Mesh cannot communicate with Sena products
via Mesh Intercom, please update to the latest firmware.
3.3 Using the Mesh
Before using Mesh Intercom, you will need to pair a
compatible Sena headset or helmet for the first time. The
Bluetooth pairing operation is only required once for each
Sena headset or helmet. The +Mesh remains paired with
the headset or helmet and automatically connects to the
paired headset or helmet again when they are within range
of each other.
3.3.1 Bluetooth Pairing with a Sena Headset or Helmet
1. Turn on the +Mesh and a headset that you would like to
pair with each other.
2. Press and hold the Multi-function Button of the +Mesh
for 5 seconds until red LED of the +Mesh start to flash
rapidly. Enter into the Bluetooth intercom pairing mode
of the headset (refer to the User’s Manual for the headset
you want to use). You do not need to press any buttons
for pairing.
3. When the LED flashes green, the pairing is completed.
You will hear “Mesh intercom on, Open Mesh,
channel 1” from the connected corresponding headset.

Sena +MESH Specifications

General

Brand	Sena
Model	+MESH
Category	Adapter
Language	English