Sena +MESH User Manual

14
MESH INTERCOM
Note:
1. The mute and unmute function only works if Mesh
Intercom is on.
2. After turning off your +Mesh or turning off the Mesh
Intercom, the Mute setting will return to default
(Unmute).
3. The mute and unmute function does not work in Mesh
Intercom Repeater Mode.
3.6 Mesh Intercom Repeater Mode
The +Mesh can be used as a Mesh Intercom Repeater
without Bluetooth pairing with a Bluetooth headet.
1. Triple tap the Multi-function Button during the Bluetooth
pairing. (Bluetooth Pairing, referring to section 3.3.1 on
page 11.)
2. The green LED will flash 3 times and the +Mesh will
operate in Mesh Intercom Repeater Mode.
• In Mesh Intercom Repeater Mode, Mesh Intercom
will start automatically when the power is on.
Note:
• In Mesh Intercom Repeater Mode, only the following
features can be executed:
– Power on/off
– Factory Reset
– Change the channel through the Sena +Mesh App.
• If you want to pair with the Bluetooth headset, execute
Factory Reset and proceed with Bluetooth pairing.

Sena +MESH Specifications

General

Brand	Sena
Model	+MESH
Category	Adapter
Language	English