SAVAGE Bluetooth
®
Open-face Helmet | 11
SAFETY PRECAUTIONS
MENU
Product Storage and Management
Take the following precautions to avoid personal injury or damage to your product
while storing and maintaining the product.
CAUTION
• Do not dispose of the product with household waste. The built-in battery is not
to be disposed of in municipal waste stream and requires separate collection.
Disposal of the product should be done in accordance with the local regulations.
NOTICE
• Keep the product free of dust. Dust may damage mechanical and electronic parts
of the product.
• The product should be stored at room temperature. Do not expose the product
to extremely high or low temperature as this may reduce the life span of electronic
devices, damage the battery, and/or melt plastic parts of the product.
• Do not clean the product with cleaning solvents, toxic chemicals, or strong
detergents as this may damage the product.
• Do not paint the product. Paint may obstruct moving parts or interfere with the
normal operation of the product.
• Do not drop or otherwise shock the product. It may damage the product or its
internal electronic circuits.
• Do not disassemble, repair or modify the product as this may damage the product
and invalidate the product warranty.
• Do not store the product in humid environments, especially for long periods of
time. It may damage the internal electronic circuits.
• Battery performance will deteriorate over time if stored for a long period of time
without being used.
• Do not store the camera in proximity to magnetic fields. Doing so may result in
camera malfunction.
• Be careful to protect the lens by avoiding rough handling or physical shock.
• Wipe the surface of the lens with a soft cloth in the following situations:
(1) When there are fingerprints on the lens surface.
(2) When the lens is used in hot or humid environments, such as near oceans or
rivers.
• Store the product in a well-ventilated room to protect the lens from dirt and dust.
To Next Page
Loading...
Need help?
General
