Sena SMH5 - 6. PAIRING THE SMH5 WITH BLUETOOTH DEVICES; 6.1 Mobile Phone Pairing

SMH5
12
6. PAIRING THE SMH5 WITH BLUETOOTH
DEVICES
Before using the SMH5 Bluetooth headset with any of Bluetooth
devicesforthersttime,youneedtodothepairingoperation.Itcan
be paired with Bluetooth mobile phones, Bluetooth stereo devices
suchasMP3,ormotorcyclespecicBluetoothGPS,andwithother
Sena Bluetooth headsets. This pairing operation is only required
once for each Bluetooth device, and the headset will remain paired
with the devices and automatically connects to the paired devices
again when they are within range. You will hear a high tone single
beep and a voice prompt when the headset connects to the paired
device automatically: “Phone connected” to a mobile phone,
“Media connected” to a Bluetooth stereo device.
6.1 Mobile Phone Pairing
6.1.1 Mobile Phone Pairing
1. Turn on the SMH5 and press the Phone Button for 5 seconds until
the LED ashes red and blue alternately and you hear multiple
beeps. You will hear a voice prompt saying “Phone pairing”.
2. Search for Bluetooth devices on your mobile phone. Select the
Sena SMH5 in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
4.The mobile phone conrms that pairing has completed and the
SMH5 is ready to use. You will hear a voice prompt from the SMH5
saying “Your headset is paired”.
5. If the pairing process is not completed within three minutes, the
SMH5 will return to stand-by mode.
6.1.2 Multipoint Mobile Phones Pairing
You can simultaneously use two mobile phones which use the mobile
phoneprole.
1.YoucanpairtherstmobilephonetotheSMH5byfollowingthe
simple procedures in “6.1.1 Mobile Phone Pairing”.
2. To pair the second mobile phone, press the Jog Dial for 5 seconds
againuntiltheredLED is rapidly ashing and you hear multiple
beeps.
3. Within 2 seconds, tap the Phone Button again, then the LED turns
toblueashingandthebeepsturntohightonedoublebeeps.You
will hear a voice prompt saying “Multipoint pairing”.
4. Search for Bluetooth devices on your mobile phone. Select the
Sena SMH5 in the list of the devices detected on the mobile phone.
5. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.