Sena SMH5 - 7. PAIRING WITH SELECTIVE PROFILE: A2 DP STEREO OR HANDSFREE; 7.1 A2 DP Stereo Music Only; 7.2 HFP for Phone Call Only

English
SMH5
15
7. PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
If you have previously paired a mobile phone to the SMH5, you
must clear the previous paring list on both devices; the mobile
phone and SMH5. To clear the pairing list on SMH5, please do a
factory reset described on the page 19.To clear the pairing list on
the mobile phone, please refer to the mobile phone manual. For
most smartphones, delete the Sena SMH5 from the list of Bluetooth
devices in setting menu.
7.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds
untiltheLEDashesredandbluealternatelyandyouhearmultiple
beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED turns to
redashingandthebeepsturntodoublemid-tonebeeps.Youwill
hear a voice prompt saying “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the Sena
SMH5 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
7.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5 seconds
untiltheLEDashesredandbluealternatelyandyouhearmultiple
beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED turns
to blueashing and the beepsturn to multiple mid-tone beeps.
You will hear a voice prompt saying “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the Sena
SMH5 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smart phones may not ask for PIN.