Sena SMH5 - 12.2 Two-way Universal Intercom; 13. FIRMWARE UPGRADE

English
SMH5
27
3. Perform the operation required for handsfree pairing on the non-
Sena Bluetooth headset (refer to the users’ manual of the headsets
you want to use). The SMH5 will automatically perform pairing with
non-Sena Bluetooth headsets in pairing mode.
12.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the Jog
Dialtobeginanintercomconversationwiththerstintercomfriend,
double tap with the second intercom friend, and triple tap with the
third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, activating the voice dialing or using the redialing
operation. You may also disconnect the existing connection by
ending a call operation function (refer to the users’ manual of the
headsets for voice dialing, redialing, and ending a call).
13. FIRMWARE UPGRADE
The SMH5 supports rmware upgrade function. Please visit Sena
Bluetooth web site at www.SenaBluetooth to check the latest
software downloads.