English
SMH5
9
In the case of the wired microphone included in the “Full-face
Helmet Kit”, attach the enclosed velcro pad for wired microphone
to the inside of the chin guard for full-face helmets. Place the wired
microphone on the velcro pad and attach it to the connector of the
speaker cable.
6. When you use the boom microphone included in the “Basic Kit”,
please make sure that the n side of the microphone is facing
outward; away from your lips. You can easily recognize it by
touchingthenwithyourngers.
n
7. To remove the headset main unit from the clamp, please make sure
to pull out the speaker cable connector fromthe main unit rst.
Then, remove the main unit from the clamp.
To Next Page
Loading...
