Senco AC4504 - User Manual

KYOCERA SENCO Netherlands B.V.
Pascallaan 88
8212 NJ Lelystad, The Netherlands
+31 320 295 575
senco.eu
© 2019 by KYOCERA SENCO Netherlands B.V.
Operating Instructions
(Original Instructions)
____________________________________
Betriebsanleitung
(Übersetzung der Ursprünglichen Anweisungen )
____________________________________
Gebruiksaanwijzing
(Vertaling van de Oorspronkelijke Gebruiksaanwijzing)
____________________________________
Mode d’Emploi
(Traduction des Instructions Originales)
____________________________________
Käyttöohjeet
(Alkuperäisten Ohjeiden Käännös)
____________________________________
Bruksvisning
(Oversettelse av de Originale Instruksjonene)
____________________________________
Bruksvisning
(Översättning av de Ursprungliga Undervisningarna)
____________________________________
Brugsanvisning
(Oversættelse af de Originale Instruktioner)
____________________________________
Instrucciones de Empleo
(La Traducción de las Instrucciones Originales)
____________________________________
Instruziono per l’Uso
(Traduzione delle Istruzioni Originali)
____________________________________
Instrukcja Obsługi
(Tłumaczenie oryginalnej instrukcji)
____________________________________
Инструкция по эксплуатации
(Перевод оригинальной инструкции)
____________________________________
Kullanma Talimatları
(Orijinal talimatların çevirisi)
____________________________________
Οδηγίες Χρήσεις
(μετάφραση των αρχικών οδηγιών)
____________________________________
Compressor
NFE2AC • Revised November 20, 2019 (Replaces15/10/2019)
WARNING: Please read the instructions and warnings for this tool carefully before use.
AC4504 • AC8305 • AC10304
AC12810
• AC12824 • AC24016
AC24050
• AC24080 • AC32024

Summary

The Importance of the Manual

Safety Warnings

Applied Safety Devices

Details the safety features integrated into the machine for protection.

Safety Marking

Explains the meaning and importance of safety signals used on the machine.

Personal Protection Equipment (PPE)

Specifies the mandatory protective gear for operators to ensure safety.

Machine Use

Destination, Field, and Place of Use

Use Limits and Command Devices

Checks Before Switching On and Machine Switching On

Details critical pre-operation checks and the procedure for starting the machine.

Machine Switching Off and Connections

Emergency Stop and Restart Procedures

Explains how to perform an emergency stop and safely restart the machine.

Connections

Electrical Connections

Maintenance

State of Switched Off Machine

Routine Maintenance

Supplementary Maintenance

Trouble - Causes - Troubleshooting

Provides a table to diagnose and resolve common machine issues.

Technical Specifications

Model Specifications

Senco AC4504 Specifications

General

Model	AC4504
Tank Capacity	4.5 gallons
Power Source	Electric
Pump Type	Oil-Free
Voltage	120 V