To Next PageTo Next Page
Need help?Do you have a question about the Senco FinishPro 18Mg and is the answer not in the manual?
Covers reading manuals, using safety equipment, and personal alertness.
Addresses explosion risks, air sources, trigger use, and safe tool handling.
Instructions on reading warnings and loading fasteners into the tool.
Compares trigger fire, bottom-fire, and restrictive trigger modes.
Solutions for air leaks near the top or bottom of the tool.
Details on pressure, air consumption, inlet, speed, and weight.
Covers reading manuals, using safety equipment, and personal alertness.
Addresses explosion risks, air sources, trigger use, and safe tool handling.
Instructions on reading warnings and loading fasteners into the tool.
Compares trigger fire, bottom-fire, and restrictive trigger modes.
Solutions for air leaks near the top or bottom of the tool.
Details on pressure, air consumption, inlet, speed, and weight.
General| Operating Pressure | 70-120 PSI |
|---|---|
| Weight | 3.5 lbs |
| Fastener Range/Length | 5/8" to 2" |
| Air Inlet | 1/4" NPT |
| Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Power Source | Pneumatic |
| Type | Brad Nailer |
| Fastener Type | 18-gauge brad nails |
| Magazine Capacity | 100 |
| Length | 10.5 in |
