To Next PageTo Next PageWhat to do if Senco FinishPro 2N1 Nail Gun has air leak near top / sluggish operation?
If your Senco Nail Gun has an air leak near the top or is operating sluggishly, verify the air supply. You may also need to tighten the screws or install a Parts Kit.
What to do if Senco FinishPro 2N1 Nail Gun has air leak near bottom / poor return?
If your Senco Nail Gun has an air leak near the bottom or poor return, clean the tool and tighten the screws. You might also need to install a Parts Kit.
Read warnings, use eye protection, and wear other required protective equipment.
Stay alert, avoid impairment, use correct power sources, and be aware of noise.
Proper grip, avoid horseplay, keep finger off trigger, respect tool.
Do not use leaking/damaged tools; only authorized repairs are permitted.
Guide to identifying and resolving common tool problems and symptoms.
Read warnings, use eye protection, and wear other required protective equipment.
Stay alert, avoid impairment, use correct power sources, and be aware of noise.
Proper grip, avoid horseplay, keep finger off trigger, respect tool.
Do not use leaking/damaged tools; only authorized repairs are permitted.
Guide to identifying and resolving common tool problems and symptoms.
General