To Next PageTo Next PageWhat to do if my Senco FinishPro 32 Nail Gun has an air leak near the bottom and poor return?
If your Senco Nail Gun has an air leak near the bottom and exhibits poor return, try cleaning the tool and tightening the screws. Alternatively, install Parts Kit YK0815.
How to fix an air leak near the top of my Senco Nail Gun, causing sluggish operation?
If your Senco Nail Gun has an air leak near the top and is operating sluggishly, verify the air supply and tighten the screws. You may also install Parts Kit YK0815.
Covers staying alert, using common sense, and wearing appropriate PPE.
Warns about explosive atmospheres, flammable materials, and improper power sources.
Covers loading fasteners and the different modes for contact-actuation triggers.
Describes the single-mode operation for sequential actuation triggers.
Instructions on how to adjust the fastener driving depth using the control wheel.
Steps to follow when a nail jam occurs, including disconnecting air and removing fasteners.
Details on applying pneumatic oil and daily cleaning/inspection of the tool.
General