Need help?Do you have a question about the Senco FramePro 601 and is the answer not in the manual?
General| Operating Pressure | 70-120 psi |
|---|---|
| Width/Depth | 4.5" |
| Type | Framing Nailer |
| Power Source | Pneumatic |
| Nail Length | 1 1/2" - 3 1/2" |
| Magazine Capacity | 70 nails |
| Height | 13.5" |
| Firing Mode | Contact or Sequential Actuation |
| Nail Angle | 20 degrees |
To Next Page
