To Next PageTo Next Page
Need help?Do you have a question about the Senco FramePro 502 and is the answer not in the manual?
Procedure for loading fasteners into the tool's magazine, including maximum capacity.
Proper handling of the feeder shoe and ensuring contact with nails for operation.
Explanation of Contact Actuation (Dual-Action) and Sequential (Restrictive) trigger modes.
Importance of reading safety manuals and keeping all screws tight for safe operation.
Daily checks for free movement of parts and applying pneumatic oil for lubrication.
Daily cleaning and inspection for wear, using appropriate cleaning solutions.
Diagnosing and resolving air leaks near the top of the tool or sluggish operation.
Troubleshooting air leaks at the bottom of the tool or issues with the return mechanism.
Guidelines for addressing unspecified operational problems and contacting support.
Table detailing different fastener codes, their inch and mm measurements.
Key technical data including operating pressure, air consumption, and weight.
Description of optional features like the Restrictive Trigger for precise fastener placement.
Procedure for loading fasteners into the tool's magazine, including maximum capacity.
Proper handling of the feeder shoe and ensuring contact with nails for operation.
Explanation of Contact Actuation (Dual-Action) and Sequential (Restrictive) trigger modes.
Importance of reading safety manuals and keeping all screws tight for safe operation.
Daily checks for free movement of parts and applying pneumatic oil for lubrication.
Daily cleaning and inspection for wear, using appropriate cleaning solutions.
Diagnosing and resolving air leaks near the top of the tool or sluggish operation.
Troubleshooting air leaks at the bottom of the tool or issues with the return mechanism.
Guidelines for addressing unspecified operational problems and contacting support.
Table detailing different fastener codes, their inch and mm measurements.
Key technical data including operating pressure, air consumption, and weight.
Description of optional features like the Restrictive Trigger for precise fastener placement.
General| Nail Type | Framing Nails |
|---|---|
| Air Inlet | 1/4 inch NPT |
| Power Source | Pneumatic |
| Tool-Free Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Nail Length | 2 - 3.5 inch |
| Operating Pressure | 70 - 115 psi |
| Magazine Capacity | 60 nails |
| Nail Gauge | 0.113 - 0.131 inch |
