Need help?Do you have a question about the Senco FramePro 600 and is the answer not in the manual?
Understand the safety instructions manual before using the tool.
Keep tool pointed away from yourself and others and connect air.
Never use a tool that leaks air or needs repair.
Install nail guide for nails < 2 1/2", insert nails into magazine.
Position nail guide, insert nails, pull feeder shoe back.
Nails driven by trigger-fire or safety element push.
Depress safety element first, then pull trigger for precise placement.
Tool has movable rail safety mechanism; activate by positioning nail, depressing tool, pulling trigger.
First action determines mode: trigger-fire or safety element push.
Pull trigger, push safety element; preferred for high production.
Disconnect air supply, use wrench/screwdriver to adjust safety element.
Disconnect air supply if a nail jam occurs.
Release latch, open door, remove jammed fastener, close door.
Loosen knob, pull back magazine, clear fastener, slide back, tighten knob.
Tool conversion for flat surface via no-mar pad.
Rotate deflector to change exhaust air direction; disconnect air, loosen screw, rotate, tighten screw.
Prevents activation with 4 or less nails; safety element locked until more nails loaded.
Prevents activation with 6 or less nails; safety element locked until more nails loaded.
Tool prevents activation when approx. 5 nails remain or magazine is pulled back.
Read safety instructions before maintenance; inspect safety element and trigger for free movement.
Squirt Senco oil daily; wipe tool clean; use non-flammable cleaning solutions.
Check air supply, tighten screws, or install Part Kit A for air leaks near top.
Tighten screws, clean tool, or install Part Kit B for air leaks near bottom.
Check air supply or install Part Kit C for broken/worn driver issues.
Clean tool, lubricate magazine, or install Part Kit D for feed/jamming issues.
Check battery orientation, low battery light, or pull trigger to diagnose battery issues.
Lists JF, GE, GC, HC, HF, KC codes and their inch/mm dimensions.
Lists GL, GD, HD, HL, KD, MD, ND codes and their inch/mm dimensions.
Lists GE, GC, HC, HE, HF, KC, MC nail codes with inch/mm dimensions.
Lists KJ, MD, NN codes and their inch/mm dimensions.
Compares operating pressure, air consumption, weight, and capacity.
Compares operating pressure, air consumption, weight, and capacity for various FramePro models.
Helpful feature for precise fastener placement.
Durable carrying case protects tool; hanger can be attached to cap.
Durable carrying case protects tool and holds accessories/fasteners.
Offers air compressors, hoses, fittings, safety glasses, gauges, lubricants, regulators, filters.
Two-year or one-year warranty from purchase date for original parts, excluding O-rings/seals/blades.
Honored if clean air used, no abuse, and tool/part returned with proof of purchase.
Only warranty provided; excludes implied warranties; liability limited to tool price.
Tool replacement offered for Acts of God if warranty registered and proof submitted.
Understand the safety instructions manual before using the tool.
Keep tool pointed away from yourself and others and connect air.
Never use a tool that leaks air or needs repair.
Install nail guide for nails < 2 1/2", insert nails into magazine.
Position nail guide, insert nails, pull feeder shoe back.
Nails driven by trigger-fire or safety element push.
Depress safety element first, then pull trigger for precise placement.
Tool has movable rail safety mechanism; activate by positioning nail, depressing tool, pulling trigger.
First action determines mode: trigger-fire or safety element push.
Pull trigger, push safety element; preferred for high production.
Disconnect air supply, use wrench/screwdriver to adjust safety element.
Disconnect air supply if a nail jam occurs.
Release latch, open door, remove jammed fastener, close door.
Loosen knob, pull back magazine, clear fastener, slide back, tighten knob.
Tool conversion for flat surface via no-mar pad.
Rotate deflector to change exhaust air direction; disconnect air, loosen screw, rotate, tighten screw.
Prevents activation with 4 or less nails; safety element locked until more nails loaded.
Prevents activation with 6 or less nails; safety element locked until more nails loaded.
Tool prevents activation when approx. 5 nails remain or magazine is pulled back.
Read safety instructions before maintenance; inspect safety element and trigger for free movement.
Squirt Senco oil daily; wipe tool clean; use non-flammable cleaning solutions.
Check air supply, tighten screws, or install Part Kit A for air leaks near top.
Tighten screws, clean tool, or install Part Kit B for air leaks near bottom.
Check air supply or install Part Kit C for broken/worn driver issues.
Clean tool, lubricate magazine, or install Part Kit D for feed/jamming issues.
Check battery orientation, low battery light, or pull trigger to diagnose battery issues.
Lists JF, GE, GC, HC, HF, KC codes and their inch/mm dimensions.
Lists GL, GD, HD, HL, KD, MD, ND codes and their inch/mm dimensions.
Lists GE, GC, HC, HE, HF, KC, MC nail codes with inch/mm dimensions.
Lists KJ, MD, NN codes and their inch/mm dimensions.
Compares operating pressure, air consumption, weight, and capacity.
Compares operating pressure, air consumption, weight, and capacity for various FramePro models.
Helpful feature for precise fastener placement.
Durable carrying case protects tool; hanger can be attached to cap.
Durable carrying case protects tool and holds accessories/fasteners.
Offers air compressors, hoses, fittings, safety glasses, gauges, lubricants, regulators, filters.
Two-year or one-year warranty from purchase date for original parts, excluding O-rings/seals/blades.
Honored if clean air used, no abuse, and tool/part returned with proof of purchase.
Only warranty provided; excludes implied warranties; liability limited to tool price.
Tool replacement offered for Acts of God if warranty registered and proof submitted.
General| Power Source | Pneumatic |
|---|---|
| Tool-Free Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Nail Length | 1 1/2" - 3 1/2" |
| Nail Size | 1 1/2" - 3 1/2" |
| Firing Mode | Sequential or Contact Trip Trigger |
| Sequential or Contact Trip Trigger | Both |
To Next Page