Need help?Do you have a question about the Senco FramePro 602 and is the answer not in the manual?
General| Operating Pressure | 70-120 PSI |
|---|---|
| Fastener Type | Framing Nails |
| Firing Mode | Sequential |
| Power Source | Pneumatic |
| Magazine Angle | 21 degrees |
| Magazine Capacity | 60 nails |
Instructions for loading fasteners and preparing the tool for use.
Explains contact actuation vs. sequential triggers for firing nails.
Details safety features, depth control, and adjusting fastener penetration.
Guidance on clearing jammed fasteners and basic tool upkeep during use.
Covers deflector rotation, lockout features, and non-toenail conversions.
Emphasizes reviewing safety manuals and performing pre-use checks.
Daily inspection of safety elements and ensuring all screws are tight.
Proper application of pneumatic oil and cleaning the tool daily.
Solutions for common issues like air leaks and slow tool performance.
Guidance for fixing jams and problems with tool return mechanisms.
Advice for other issues and when to contact professional service.
Detailed specifications for various nail and fastener codes and sizes.
Key technical specs like operating pressure, air consumption, and weight.
Explanation of optional trigger features for enhanced control.
Information on protective carrying cases and tool suspension methods.
List of optional accessories to complement tool functionality.
To Next Page
