To Next PageTo Next PageWhat to do if Senco FramePro701XP has air leak near top / Sluggish operation?
If your Senco Nail Gun has an air leak near the top or is operating sluggishly, first verify the air supply. If the issue persists, try tightening the screws or installing a Parts Kit.
What to do if Senco Nail Gun has air leak near bottom / Poor return?
If there's an air leak near the bottom of your Senco Nail Gun, or it has poor return, try cleaning the tool. If that doesn't solve the problem, consider tightening the screws or installing a Parts Kit.
General| Fastener Type | Framing Nails |
|---|---|
| Power Source | Pneumatic |
| Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Sequential/Rapid Fire Modes | Yes |
| Width | 4.5 in (114 mm) |
| Fastener Length | 2 in to 3-1/2 in (50 mm to 90 mm) |
| Magazine Capacity | 70 |
| Operating Pressure | 70 - 120 psi |
| Air Inlet | 1/4 in NPT |
| Firing Mode | Sequential Actuation |
Always wear safety glasses with side shields and other PPE as needed for safe operation.
Stay alert, use common sense, and avoid operating tool when tired or under the influence.
Never use the tool in explosive atmospheres or near flammable materials.
Describes two ways to drive fasteners using the Contact-Actuation trigger mode.
Explains how to drive fasteners using the Sequential Actuation trigger mode for precise placement.
Explains the sequential trigger feature, beneficial for precise fastener placement.
Details common warranty exclusions, conditions for honoring warranty, and general warranty terms.
Explains how to make a warranty claim, including proof of purchase, and procedures for natural disaster replacements.
Describes the company's commitment to customer satisfaction and the policy for returns within thirty days.
