Fastening Solutions
©2005 by Senco Products, Inc. www.senco.com
RoofPro
™
450
Coil Roofing Nailer
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
RoofPro 450 Coil Nailer is our Pro Series Roofing Coil Nailer. This
construction grade tool has steel wear plates and has fully adjustable
shingle guide, drive depth and exhaust.
Item #: 3C0001N: Contact Actuation (Dual Action)
3C0002N: Sequential Actuation (Restrictive)
Weight: 5.9 lbs. ( 2.68 kg)
Height: 9.75" (247.6 mm)
Length: 9.75" (247.6 mm)
Nail Capacity: 120
Collation: Conical wound, angled coil wire
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: Tool is available with either sequential
or contact actuation trigger mechanism.
Hose Fitting: 1 ⁄4 " NPT
Drives 11 gauge (.120") , Full Round Head Nails 3/4" 1-3/4" smooth
shank. Capacity 120.
For asphalt and fiberglass shingle nailing, for both new roofs
and reroofing. Also for attaching waterproof tar paper, metal
drip edges, insulation board.
• Aluminum main housing and cap – more durable than magnesium
for punishing roofing environments
• Tool-free adjustable depth of drive for consistent and controllable
nail set
• Comfort and convenience features include: durable comfort grip, 360
adjustable exhaust (tool required), and adjustable shingle guide
• Steel wearplates reduce shingle abrasion on tool
• Adjustable nail canister accommodates entire range of true
round-head roofing nails.
• Tool includes case, tool oil and wrench
HJ (.120)
1
1
7
/8
1
1
/2
1
1
/4
3
/4
3
/4
To Next Page
Need help?
General
