Sencor SVC 6301BK - Page 7

Bagless Stick Vacuum Cleaner
SVC 6301BK / SVC 6301VT
Attach the floor inlet nozzle to the body of the vacuum cleaner:
Attach the floor nozzle (pic. C3) on to the suction tube (pic. C2) on the body of the vacuum cleaner.
C
(D Vacuum cleaner body
(2 Suction tube
@ Floor nozzle
USING YOUR VACUUM CLEANER
Connecting your vacuum cleaner to the electrical power grid.
Insert the power cord into an electrical power socket.
Adjusting the floor inlet nozzle according to the floor surface.
You may set the inlet nozzle according to the floor surface by adjusting the inlet flap:
e If you want to vacuum carpets retract the bristles by turning the flap accordingly (pic. D2).
e |f you want to vacuum hard and smooth surfaces, extend the bristles out of the nozzle by turning the flap
accordingly (pic. D1).
D
(D Flap position for vacuuming hard
(smooth) floors
@) Flap position for vacuuming carpets
EN-7
Copyright © 2012, Fast CR, a.s. Revision 10/2012