Sencor SVC 6301BK - Page 8

Bagless Stick Vacuum Cleaner
SVC 6301BK / SVC 6301VT
Turning your vacuum cleaner on and off
To switch on (off) the vacuum cleaner move the ON/OFF button (pic. E1) to position 1 (on) or 0 (off).
Adjusting the suction strength
You can regulate the suction using the control dial on the body of the vacuum cleaner (pic. E2).
Mx. Tips
Q e Use the maximum suction strength when vacuuming carpets or floors with a hard surface. Use the
reduced strength when vacuuming upholstery, window curtains, etc.
E
(D ON/OFF button
(2 Control dial
Ending the vacuuming process
When you finish vacuuming, switch the vacuum cleaner off by switching the ON/OFF button to position O (off)
and then disconnect the power cord plug from the power socket.
To wind up the power cord you can use the two swivel holders (pic. F1), which you turn away from yourself after
the cord has been wound up.
Copyright O 2012, Fast CR, a.s. Revision 10/2012