SL320005700 Ed.00 - 04-2011 - 5 _EN-
2.4. Control panel description and functions
The machine controls are located on the side control panel.
COMMAND MODEL FUNCTION
ALL
Main switch: its function is to command:
- the starting of the machine;
- the switching off of all the functions present on the machine.
ALL
Lid light switch: to turn on/off light (if present) on the bowl lids.
ALL
Bowl mixing switch (one for each bowl): it is used to switch on and off the
gearmotor that drives the auger for mixing the product in the respective
bowl.
ALL
Refrigeration system changeover switch (one for each bowl):
- in position “0”, the refrigeration system is deactivated;
- in position “I”, the refrigeration system is activated for the production of
granitas;
- in position “II”, the refrigeration system is activated for the production of
cold drinks.
ALL VERSIONS WITH
ELECTRONIC THER-
MOSTAT
Electronic thermostat:
- This shows the temperature of the product inside the tank and using
the keys
, it is possible to change the temperature of the drink
when the machine is operating in “cold drinks” mode.
To Next Page
Loading...