Putting the AMBEO Soundbar | Max into operation
30 | AMBEO Soundbar | Max
Putting the AMBEO Soundbar |
Max into operation
Preparing the SB01-RC remote control
To remove the transport protection of the battery:
▷ Use a suitable object (e.g. a coin) to open the battery compart-
ment cover (located on the bottom side of the remote control) by
turning one turn counter-clockwise.
▷ Remove the plastic strip.
▷ Close the battery compartment cover by turning one turn clock-
wise.
Connecting/disconnecting the Soundbar
to/from the power supply system
Connecting to the power supply system
▷ Connect the plug of the power cable to the POWER socket on the
Soundbar.
▷ Connect the power plug of the power cable to a suitable wall
socket.
CAUTION
Damage to the product due to unsuitable power supply!
If you connect the product to an unsuitable power supply, the prod-
uct can be damaged.
▷ Use a suitable power cable to connect the product to the power
supply system (100 - 240 V~, 50/60 Hz).
To Next Page
Loading...
