Operating the AMBEO Soundbar | Max
AMBEO Soundbar | Max | 35
Operating the AMBEO Soundbar |
Max
Switching the Soundbar on
If you want to switch on the Soundbar, you have the following
options:
•Press the on/off button on the Soundbar.
•Press the n/off button on the remote control.
• Press the on/off button on the TV remote control (if the TV is con-
nected to the Soundbar via HDMI CEC).
• Use the Smart Control app.
If you want to switch on the Soundbar from standby mode without
network connection (
> 36):
•Press the on/off button on the Soundbar for 1 second.
Switching the Soundbar off (standby
mode)
If you want to switch off (standby mode) the Soundbar, you have the
following options:
•Press the on/off button on the Soundbar.
•Press the on/off button on the remote control.
• Press the on/off button on the TV remote control (if the TV is con-
nected to the Soundbar via HDMI CEC).
• Use the Smart Control app.
The Soundbar is in standby mode. The status LED lights up red.
Any existing network connection is retained so that the Soundbar
can be switched on automatically via the network or HDMI sig
-
nals.
You can put the Soundbar in standby mode and switch off all network
connections (
> 36).
To completely disconnect the Soundbar from the power supply sys-
tem, > 30.
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels for long periods of time can
lead to permanent hearing defects.
▷ Adjust the volume to a low level before selecting a
source.
▷ Do not continuously expose yourself to high volume lev-
els.
If the Soundbar is inactive for 20 minutes (default setting), it
automatically switches to standby mode (
> 37).
To Next Page
Loading...
