EW-DX EM 2 rack receiver
136
Updating the firmware of the receiver
You can update the receiver firmware using the Sennheiser
Control Cockpit software or the Wireless Systems Manager
software.
▷ To do so, connect the receiver to a network (see „Connect-
ing receivers in a network“) and establish the connection
with the software.
For more information about controlling devices with the
Sennheiser Control Cockpit or Wireless Systems Man-
ager software, refer to the software help.
You can download the software here:
www.sennheiser.com/control-cockpit-software
www.sennheiser.com/wsm
To update the transmitter’s f rmware, go to System -> TX
Update in the menu on the receiver. See „System -> TX
Update menu item“.
To Next Page
Loading...
